ENKAMAT FAQ's- What is it? What is it made of, Is it better than Jute and other products.....

What is EnkaMat?

EnakaMat is a high performance three-dimensional mat for vegetation  reinforcement on slopes. It's used when the naturally grown or planted vegetation cannot prevent soil erosion from water or wind by itself. 

If vegetation is absent after construction works, or is difficult to establish on steep slopes where loading may be too high for plain vegetation to withstand Enkamat offers the solution.

Why Use Enkamat?

Enkamat has two objectives.

• To provide temporary protection to the bare soil to encourage the development of vegetation under circumstances where this is normally difficult if not impossible.
• Enkamat's second objective is to permanently reinforce vegetation. It gives extra strength to the vegetation so that higher loading can be withstood than with plain vegetation without reinforcement.

How do Erosion Control Mats (blankets) Work?

The end goal for an erosion contol mat (blanket) is to hold the topsoil in place and slow down the effects of flowing water, blowing wind, etc and allowing the plants to remain in place.

Enkamat in Landscaping Projects

Enkamat's applications in landscaping are manifold. For erosion control, envision Enkamat as a protective layer on slopes, preventing soil degradation and fostering vegetation growth. In green roof projects, it acts as a stabilization mat, securing plants against winds and ensuring a flourishing rooftop garden. For walkways or permeable surfaces, Enkamat aids in water drainage while providing support for grass or ground cover. In hardscaping, it can serve as a foundation stabilizer, creating a robust base for patios or pathways.

Is Jute the same thing as EnkaMat?

Enamat is made of an inert material which makes it very durable and able to withstand long periods of time. 

Natural vegetation reinforcement materials such as jute,c, flax, wood wool or straw-mats only last a short period of time. They are only meant to provide temporary protection up to the point that the vegetation can take over this task.

Enkamat not only offers support in the early stages of the vegetation growth but adds extra strength after the vegetation is fully grown.

Natural materials are not consistent regarding their quality.  Enkamat is manufactured under controlled conditions. This ensures a high quality of the material according to ISO 9001 standards.

Where does Erosion Occur?

Soil erosion happens gradually from the impact of wate or wind which displaces the upper layer of soil. Erosion can happen in flat bare windy areas as well as places where slopes are exposed to rainfall and water runoff.

In a broader sense, the natural process of soil erosion is caused by the dynamic activity of erosive agents that include snow, air/ wind, water, ice/glaciers, plants, animals and humans.

How does Soil Erosion Affect Topsoil?

EnkaMat Applications- Where is EnkaMat used?

• protection of slopes and embankments against erosion by rainfall and wind
• establishment of vegetation on steep weathered slopes
• earth stabilization on smooth surfaces
• protection of embankments against hydraulic loadings
• protection of waterways against hydraulic loadings
• protection of water deference
• special applications

Enkamat for Civil Engineering

In civil engineering, Enkamat proves indispensable. As a foundation protection layer, it shields structures from soil erosion, reducing the risk of foundation damage. On construction sites, Enkamat acts as a base reinforcement, providing stability for temporary access roads and construction entrances. In slope stabilization, Enkamat prevents soil erosion, minimizing the potential for landslides. On embankments, it offers erosion control, safeguarding against weathering forces and ensuring structural longevity.

Here's a Great Erosion Website to learn more!

Don't stop now and erode your curiosity. Let's slow the spread of soil!!! Reach us the following ways to learn more.

What is EnkaMat made of?

Enkamat is an open three dimensional synthetic mat consisting of randomly placed filaments of polyamide/ nylon.

Is Enkamat Durable and made To Last?

Enamat is made of an inert material which makes it very durable and able to withstand long periods of time. 

Natural vegetation reinforcement materials such as jute,c, flax, wood wool or straw-mats only last a short period of time. They are only meant to provide temporary protection up to the point that the vegetation can take over this task.

Enkamat not only offers support in the early stages of the vegetation growth but adds extra strength after the vegetation is fully grown.

Natural materials are not consistent regarding their quality.  Enkamat is manufactured under controlled conditions. This ensures a high quality of the material according to ISO 9001 standards.

What are EnkaMat's Advantages?

Enkamat fills the gap between a protection with a plain vegetation and a more radical protection with materials such as rock, concrete or asphaltic mixtures.

The advantage is:

• Protection of a ground surface by vegetation is preferred from an environmental point of view.  Aesthetically, reinforced grass is indistinguishable from plain vegetation cover so it blends in with the landscape.  Also, the use of vegetation encourages the development of flora and fauna.
• Generally, vegetation reinforcement is cheaper than the more traditional construction using hard materials;
• Under normal circumstances, vegetation reinforcement is easier to place than more traditional methods.

What is an Erosion Control Mat (blanket)?

There are different types of erosion control mats also called blankets.

EnkaMat erosion control matting is manufactured from nylon to eliminate the BUOYANCY factor associated with submerged conditions. It provides permanent TRM protection in vegetated channels, as well as on slopes.

Erosion controled blankets are typically biodegradable open weave blankes that only provide temporary cover and support for newly planted slopes.

What are some erosion control methods?

The list is long for erosion control methods:

• cellular confinement systems.
• gabions.
• riprap.
• terracing
• contour plowing.
• crop rotation.
• conservation tillage.
• contour bunding.
• cover crops.
• fiber rolls (also called straw wattles)

Why is Soil Erosion so Important?

Engineered Standards for Erosion and Sediment Control

Soil erosion has a significant impact on valuable water resources throughout the world. The Erosion Control Technology Council (ECTC) is a collaboration of manufacturers and partners throughout the industry, dedicated to advancing the knowledge, experience, and expertise of erosion and sediment control.

The ECTC works diligently to protect against soil erosion that would otherwise impair water resources used for drinking, navigation, recreation, or irrigation. Collaboratively, the ECTC reviews the challenges and defines standards for Rolled Erosion Control Products (RECPs), Hydraulic Erosion Control Products (HECPs), and Sediment Retention Fiber Rolls (SRFRs). Please visit their site to learn more.