HDPE Liners & LLDPE Liners - Roll Sizes

What are the roll sizes for HDPE and LLDPE Liners? Here you go!

When do you use HDPE versus LLDPE?

**Please note- minimum order for any of our HDPE and LLDPE liners is 1000 square feet. Thank you.**

GPS HD Smooth HDPE 12, 20, 30, 40, and 60 mil

	12 mil	20 mil	30 mil	40 mil	60 mil
Length FT	1,850	1,330	1,210	910	600
Width FT	19	19	22	22	22
Area SQ FT	35,150	25,270	26,620	20,020	13,200

HD Smooth HDPE (High-Density Polyethylene) liners are commonly used for applications that require a smooth surface for improved flow characteristics, such as in the mining, oil and gas, and chemical industries. Below are some general guidelines for the applications of HD Smooth HDPE liners of various mil thicknesses:

12 mil: This is a relatively thin HD Smooth HDPE liner that is typically used for secondary containment, landfill caps, and temporary pond liners in applications that require a smooth surface for improved flow characteristics.
20 mil: This is a more durable HD Smooth HDPE liner that is commonly used for primary containment, landfill liners, and agricultural pond liners where a smooth surface is necessary.
30 mil: This HD Smooth HDPE liner is even more durable than 20 mil and is typically used for primary containment, landfill liners, and agricultural pond liners that require extra protection and a smooth surface.
40 mil: This HD Smooth HDPE liner is thicker and more puncture-resistant than the 30 mil liner and is typically used for more demanding applications, such as lagoon liners, large pond liners, and industrial storage tank liners where a smooth surface is necessary.
60 mil: This is the thickest and most durable HD Smooth HDPE liner available and is typically used for the most demanding applications, such as landfill liners, hazardous waste containment, and industrial tank liners where a smooth surface is required.

It's important to note that the specific requirements for HD Smooth HDPE liner thicknesses may vary depending on the application and the specific use case. It's recommended to consult with an expert in the field to determine the appropriate mil thickness for your specific application.

GPS HD Textured 30, 40, 60 and 80 mil HDPE

	30 mil	40 mil	60 mil	80 mil
Length FT	1,020	790	600
Width FT	21.5	21.5	21.5
Area SQ FT	20,855	16,125	11,180

Textured HDPE (High-Density Polyethylene) liners are commonly used in applications that require increased friction and slip resistance, such as in the mining, agricultural, and waste management industries. Below are some general guidelines for the applications of textured HDPE liners of various mil thicknesses:

30 mil: This textured HDPE liner is commonly used for primary and secondary containment in applications such as landfill liners, waste ponds, and agricultural applications where slip resistance is important.
40 mil: This textured HDPE liner is thicker and more puncture-resistant than the 30 mil liner and is typically used for more demanding applications such as mining and industrial containment areas where increased slip resistance is required.
60 mil: This is a heavy-duty textured HDPE liner that is commonly used for industrial applications such as oil and gas containment, chemical storage, and mining.
80 mil: This is the thickest and most durable textured HDPE liner available and is typically used for the most demanding applications such as mining, oil and gas, and chemical containment.

It's important to note that the specific requirements for textured HDPE liner thicknesses may vary depending on the application and the specific use case. It's recommended to consult with an expert in the field to determine the appropriate mil thickness and texture for your specific application.

GPS HD Smooth GM-13 30, 40, 60, and 80 mil HDPE

	30 mil	40 mil	60 mil	80 mil
Roll Length ft	1,090	815	540	400
Roll Width ft	22	22	22	22
Roll Area SQ FT	23,980	17,930	11,800	8,800

HDPE Smooth GM-13, 30, 40, 60, and 80 mil liners are specially formulated to provide increased resistance to chemicals and hydrocarbons. These liners are commonly used in applications where protection against chemical and hydrocarbon exposure is critical. Below are some general guidelines for the applications of HDPE Smooth GM liners of various mil thicknesses:

GM-13: This is a relatively thin HDPE liner that is commonly used for secondary containment applications in areas where chemicals or hydrocarbons may be present.
GM-30: This HDPE liner is thicker and more durable than the GM-13 liner, and is commonly used for primary containment applications in areas where chemicals or hydrocarbons may be present.
GM-40: This HDPE liner is even more durable than the GM-30 liner and is typically used for applications such as chemical storage tanks, oil and gas containment, and wastewater treatment.
GM-60: This is a heavy-duty HDPE liner that is commonly used for demanding applications such as hazardous waste containment, chemical storage, and oil and gas containment.
GM-80: This is the thickest and most durable HDPE liner available, and is typically used for the most demanding applications such as chemical storage, oil and gas containment, and mining.

It's important to note that the specific requirements for HDPE Smooth GM liner thicknesses may vary depending on the application and the specific use case. It's recommended to consult with an expert in the field to determine the appropriate mil thickness and GM formulation for your specific application.

GPS Textured HD 30, 40, 60 and 80 mil HDPE

	30 mil	40 mil	60 mil	80 mil
Roll Length ft	1,090	815	540	400
Roll Width ft	21.5	21.5	21.5	21.5
Roll Area SQ FT	23,435	17,523	11,610	8,600

GPS LL Smooth LLDPE Nominal 12, 20, 30, 40 and 60 mil

	12 mil	20 mil	30 mil	40 mil	60 mil
Length FT	1,850	1,330	1,210	919	600
Width FT	19	19	22	22	22
Area SQ FT	35,150	25,270	26,620	20,020	13,200

Smooth LLDPE (Linear Low-Density Polyethylene) liners are commonly used in applications that require flexibility and durability, such as in the agricultural, mining, and waste management industries. Below are some general guidelines for the applications of Smooth LLDPE liners of various mil thicknesses:

Nominal 12 mil: This is a relatively thin LLDPE liner that is typically used for temporary or short-term applications such as pond liners, construction site covers, and ground covers.
Nominal 20 mil: This is a more durable LLDPE liner that is commonly used for applications such as pond liners, canal liners, and landfill caps.
Nominal 30 mil: This LLDPE liner is even more durable than the 20 mil liner and is typically used for primary containment applications such as landfill liners and hazardous waste containment.
Nominal 40 mil: This LLDPE liner is thicker and more puncture-resistant than the 30 mil liner and is typically used for more demanding applications such as lagoon liners, large pond liners, and industrial storage tank liners.
Nominal 60 mil: This is the thickest and most durable LLDPE liner available and is typically used for the most demanding applications such as mining and industrial containment areas.

It's important to note that the specific requirements for Smooth LLDPE liner thicknesses may vary depending on the application and the specific use case. It's recommended to consult with an expert in the field to determine the appropriate mil thickness and formulation for your specific application.

GPS LLDPE Smooth GM-17 20,30,40,60 and 80

	20 mil	30 mil	40 mil	60 mil	80 mil
Roll Length ft	1,330	1,210	910	600	405
Roll Width ft	22	22	22	22	22
Roll Area SQ FT	29,260	26,620	10,020	13,200	8,910

GPS LL Textured LLDPE 30, 40, 60 and 80 mil

	30 mil	40 mil	60 mil	80 mil
Roll Length ft	970	750	520
Roll Width ft	21.5	21.5	21.5
Roll Area SQ FT	20,855	16,125	11,180

GPS LLDPE Nominal Textured 30, 40, 60 and 80 mil

	30 mil	40 mil	60 mil
Length FT	1,020	790	550
Width FT	21.5	21.5	21.5
Area SQ FT	21,930	16,985	11,825

GPS Diamond Scrim 8, 12, and 20 mil

	8 mil	12 mil	20 mil
Roll Length ft	8,000	5,550	4,010
Roll Width ft	6,167	6,167	6,167
Roll Area SQ FT	49,336	33,918.5	24,792.67

GPS Diamond Scrim - GRI GM 25- 30, 36, 45 mil

	30 mil	36 mil	45 mil
Roll Length ft	11.83	11.83	11.83
Roll Width ft	1500	1230	1000
Roll Area SQ FT	17,745	14,551	11,830

GPS Woven Coated HDPE 9, 12, 16, 24, and 30 mil

	9 mil	12 mil	16 mil	20 mil	24 mil	30 mil
Roll Length ft	3000	3,000	4,000	3,000	2,250	2,250
Roll Width ft	12	12	12	12	12	12
Roll Area SQ FT	36,000	36,000	48,000	48,000	27,000	27,000

Woven coated HDPE (High-Density Polyethylene) is a type of material that is used for a variety of applications that require a strong and durable fabric. The mil thicknesses of 9, 12, 16, 24, and 30 are common thicknesses for woven coated HDPE, each with their own set of applications. Below are some of the common uses for each of these thicknesses:

9 mil: 9 mil woven coated HDPE is often used for temporary ground cover or as a protective tarp for equipment and machinery.
12 mil: 12 mil woven coated HDPE is commonly used as a vapor barrier for building construction or as a liner for ponds, canals, and other water containment structures.
16 mil: 16 mil woven coated HDPE is often used for larger water containment structures such as reservoirs and waste water treatment ponds.
24 mil: 24 mil woven coated HDPE is commonly used for applications where increased puncture resistance is needed, such as for lining landfills or hazardous waste storage facilities.
30 mil: 30 mil woven coated HDPE is the thickest and most heavy-duty of the common thicknesses, and is used for the most demanding applications such as lining tanks, pits, and other heavy-duty containment structures.

It's important to note that the specific application and requirements will determine the appropriate thickness of woven coated HDPE to use. Consultation with an expert in the field can help determine the best thickness for your specific application.