High Density Polyethylene (HDPE ) Textured 30, 40,60,80 Mil
GPS Textured HD Nominal HDPE geomembrane sheets that are textured by a nitrogen injection. This surface texture gives the material high friction resistance, which keeps soil in place on slopes and improves traction on drilling pads for crew safety. Localized settlement of fill material on covered slopes is mitigated by increasing the coefficient of friction. GPS Textured HD Nominal membranes are manufactured with prime resins and have outstanding frictional resistance, chemical resistance, mechanical properties and UV resistance.
When do you use HDPE versus LLDPE? 
GPS Textured HD Nominal Common Applications:
- Landfills
- Reserve Pits
- Frac Pits
- Under Rig Liners
- Retention Ponds
- Fresh Water Pits
- Flowback Pits
- Secondary Containment Download Data Sheet Here
Product Specifications:
| Properties | Test Method | Frequency | Minimum Average Values | ||||
|---|---|---|---|---|---|---|---|
| 30 | 40 | 60 | 80 | ||||
| Thickness, mil
Lowest individual reading 8 of 10 values |
ASTM D5199 | Every Roll | Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
|
| Density, g/cm3 (minimum) | ASTM D1505 | 200,000 lb | .940 | .940 | .940 | .940 | |
| Asperity Height, mils | ASTM D7466 | Every Roll | 16 | 16 | 16 | 16 | |
| Tensile Properties (Each Direction) Strength at Break, lb/in width (N/mm) Strength at Yield lb/in width (N/mm> Elongation at Break (%) Elongation at Yield (%) |
ASTM D6693, Type IV |
20,000 lb | 43 (8) 60 (10) 100 12 |
57 (10) 80 (14) 100 12 |
86 (15) 120 (21) 100 12 |
114 (20) 160 (28) 100 12 |
|
| Tear Resistance, lb (N) | ASTM D1004 | 45,000 lb | 20 (88) | 27 (119) | 40 (178) | 53 (237) | |
| Puncture Resistance, lb (N) | ASTM D4833 | 45,000 lb | 43 (190) | 57 (254) | 86 (380) | 114 (507) | |
| Carbon Black Content (%) (Range) | ASTM 1603 | 20,000 lb | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 | |
| Carbon Black Dispersion | ASTM D5596 | 45,000 lb | Note(1) | Note(1) | Note(1) | Note(1) | |
| Standard Roll Dimensions | |||||||
| Roll Length(2), ft | 1,020 | 790 | 600 | ||||
| Roll Length(2), ft | 21.5 | 21.5 | 21.5 | ||||
| Roll Area, ft(2) | 20,855 | 16,125 | 11,180 | ||||
(1) of 10 readings; 8 of 10 must be ? 14 mils (53mm), and lowest individual reading must be ? 12 mils (30mm)
(1)9 of 10 views shall be Category 1 or 2. No more than 1 view from Category 3.
(2)Roll widths and lengths have a tolerance of  1%
*Custom material thicknesses also available
This data is provided for informational purposes only. Global Plastic Sheeting makes no warranties as to the suitability of the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice, please check with Global Plastic Sheeting for current updates.
