Enka®WallDrain and 3D WallDrain products combine Enkamat® and Colback® technologies (with other nonwoven technologies) to provide proven performance in the construction industry, resulting in superior products that are installer friendly.
The WallDrain product series is an exterior wall drain product for use behind traditional stucco, EIFS, manufactured stone, fiber cement and metal panel
applications.
The product’s 3D design provides a drain path and ventilation for incidental moisture between exterior wall finish materials and weather barrier
sheathing. This product design combines the benefit of compression strength using traditional testing measurements with the spring-like structure of Enkamat® products. This product is designed for commercial or residential applications.
Low & Bonar’s 3D matrix technologies have been used for decades as a ventilation and drainage medium for the building industry. Our product range can be customized to meet any requirements or building codes.
Stucco
ThinBrick or Stone
EIFS (exterior insulation and finish system)
Wood Siding
Fiber Cement Siding
Continuous ventilation and
drainage which removes
incidental moisture from the
wind driven rain pressure
differential
Redirects and draws moisture
away from vulnerable wall
sheathing materials
Conforms to irregular surfaces
and corners with complete and
effective coverage
Provides 100% coverage of wall
area
Filter fabric assures drain path
remains completely clear of
stucco or mortar
Designed to create open flow
path even at excessive
pressures
Dimensionally stable in hot
weather
Not brittle in cold weather
Product Offerings
Thickness Under Load Comparatives- 6mm
To the best of our knowledge, the information contained herein is accurate. However, Global Plastic Sheeting cannot assume any liability
whatsoever for the accuracy or completeness thereof. Final determination of the suitability of any information or material for the use
contemplated, of its manner of use and whether the suggested use infringes any patents is the sole responsibility of the user.
These products may be covered by patents or patents pending.
Global Plastic Sheeting, Inc.
Mailing Address: P.O. Box 8313 Chula Vista, CA 91912 866.597.9298 Warehouse & Sales Office: 1548 JayKen Way, Units C & D, Chula Vista, CA 91911 © 2008-2022 www.globalplasticsheeting.com. CEO Lee Hinsley