GPS LL Textured LLDPE- Linear Low Density Polyethylene
GPS LL Textured is a textured membrane that is manufactured with prime resins and have outstanding frictional resistance, chemical resistance and mechanical properties as well as UV resistance. The geomembranes are textured by a nitrogen injection. This surface texture gives the liner high frictional resistance, which keeps soil in place on slopes and improves traction on drilling pads.
Learn more about Textured LLDPE here.
LLDPE Applications Include:
* Landfills * Reserve Pits * Frac Pits * Under Rig Liners * Retention Ponds * Fresh Water Pits * Flowback Pits * Secondary Containments
***Minimum 1000 square foot orders***
Dial us from your landline: 760 597 9298 0r 866 597 9298. Thank you!
GPS LL Textured Specifications
Properties | Test Method | Frequency | Minimum Average Values | |||
---|---|---|---|---|---|---|
30 mil | 40 mil | 60 mil | 80 mil | |||
Thickness, mil
Lowest individual reading 8 of 10 values |
ASTM D5199 | Per Roll | Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
Nom. (-10%)
-15% |
Density, g/cm3 (Maximum) | ASTM D1505 | 200,000 lb | .939 | .939 | .939 | .939 |
Asperity Height(1) | ASTM D7466 | Every Roll | 16 | 16 | 16 | 16 |
Tensile Properties (Each Direction) Strength at Break, lb/in width (N/mm) Elongation at Break (%) |
ASTM D6693, Type IV |
20,000 lb | 41 (7) 250 |
54 (9) 250 |
81 (14) 250 |
108 (19) 250 |
Tear Resistance, lb (N) | ASTM D1004 | 45,000 lb | 14 (63) | 20 (90) | 30 (135) | 40 (178) |
Puncture Resistance, lb (N) | ASTM D4833 | 45,000 lb | 30 (135) | 40 (180) | 59 (262) | 79 (351) |
Carbon Black Content (%) (Range) | ASTM 1603 | 20,000 lb | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 |
Carbon Black Dispersion | ASTM D5596 | 45,000 lb | Note(2) | Note(2) | Note(2) | Note(2) |
Standard Roll Dimensions | ||||||
Roll Length(2), ft | 1,020 | 790 | 550 | |||
Roll Length(2), ft | 21.5 | 21.5 | 21.5 | |||
Roll Area, ft(2) | 21,930 | 16,985 | 11,825 |
(1) of 10 readings; 8 of 10 must be ? 14 mils (53mm), and lowest individual reading must be ? 12 mils (30mm)
(2) 9 of 10 views shall be Category 1 or 2. No more than 1 view from Category 3.
(2)Roll widths and lengths have a tolerance of +/- 1%
*Custom material thicknesses also available
This data is provided for informational purposes only. Global Plastic Sheeting makes no warranties as to the suitability of the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice, please check with Global Plastic Sheeting for current updates.