GPS LL Textured LLDPE- Linear Low Density Polyethylene

GPS LL Textured is a textured membrane that is manufactured with prime resins and have outstanding frictional resistance, chemical resistance and mechanical properties as well as UV resistance. The geomembranes are textured by a nitrogen injection.  This surface texture gives the liner high frictional resistance, which keeps soil in place on slopes and improves traction on drilling pads.

Retension_pond.jpg

Applications Include:

*  Landfills *  Reserve Pits *  Frac Pits *  Under Rig Liners *  Retention Ponds *  Fresh Water Pits *  Flowback Pits *  Secondary Containments

***Minimum 1000 square foot orders***

Download Data Sheet Here

CLICK to CALL GPS From cell phone.

GPS LL Textured Specifications

 

PropertiesTest MethodFrequencyMinimum Average Values
  30 mil 40 mil 60 mil 80 mil
Thickness, mil

 

Lowest individual reading 8 of 10 values
Lowest individual for any of 10 values

ASTM D5199 Per Roll Nom. (-10%)

 

-15%
-20%

Nom. (-10%)

 

-15%
20%

Nom. (-10%)

 

-15%
-20%

Nom. (-10%)

 

-15%
-20%

Density, g/cm3 (Maximum) ASTM D1505 200,000 lb .939 .939 .939 .939
Asperity Height(1) ASTM D7466 Every Roll 16 16 16 16
Tensile Properties (Each Direction)
Strength at Break, lb/in width (N/mm)
Elongation at Break (%)
ASTM D6693,
Type IV
20,000 lb 41 (7)
250
54 (9)
250
81 (14)
250
108 (19)
250
Tear Resistance, lb (N) ASTM D1004 45,000 lb 14 (63) 20 (90) 30 (135) 40 (178)
Puncture Resistance, lb (N) ASTM D4833 45,000 lb 30 (135) 40 (180) 59 (262) 79 (351)
Carbon Black Content (%) (Range) ASTM 1603 20,000 lb 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0 2.0 – 3.0
Carbon Black Dispersion ASTM D5596 45,000 lb Note(2) Note(2) Note(2) Note(2)
Standard Roll Dimensions
Roll Length(2), ft 1,020 790 550  
Roll Length(2), ft 21.5 21.5 21.5  
Roll Area, ft(2) 21,930 16,985 11,825

 

(1) of 10 readings; 8 of 10 must be ? 14 mils (53mm), and lowest individual reading must be ? 12 mils (30mm)
(2) 9 of 10 views shall be Category 1 or 2. No more than 1 view from Category 3.
(2)Roll widths and lengths have a tolerance of +/- 1%
*Custom material thicknesses also available

This data is provided for informational purposes only. Global Plastic Sheeting makes no warranties as to the suitability of the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice, please check with Global Plastic Sheeting for current updates.