Frac Tank Liners- Rig Site Pad * Frac Tank Liner * Rig Site Pad * Frac Tank Liner * Brine Pond Liner * Reservoir Liner * Temporary Covers * Daily Cover Brine Pond Liner * Reservoir Liner
GPS LL Smooth LLDPE Nominal is a strong and flexible LLDPE geomembrane. It is designed specifically to meet your containment needs. GPS LL Smooth has been used successfully in oil & gas, industrial, municipal, agricultural and decorative projects. When higher flexibility is required, this liner with its excellent elongation properties can mold to any preexisting topography. It is also used in buried applications. The flexibility of this liner makes installation easy, and reduces potential damage to the system. The high tear resistance ensures system integrity even in hazardous conditions.
Applications include:
Rig Site Pad * Frac Tank Liner * Brine Pond Liner * Reservoir Liner * Temporary Covers * Daily Cover
GPS LL Smooth LLDPE Nominal
| Properties | Test Method | Frequency | Minimum Average Values | ||||
|---|---|---|---|---|---|---|---|
| 12 mil | 20 mil | 30 mil | 40 mil | 60 mil | |||
| Thickness, mil Lowest individual reading |
ASTM D5199 | Per roll | 11 9.2 |
18 16.2 |
27 24.3 |
36 32.4 |
54 48.6 |
| Density, g/cm3 (max) | ASTM D1505 | 200,000 lb | .939 | .939 | .939 | .939 | .939 |
| Tensile Properties (Each Direction)
Strength at Break, lb/in width (N/mm) |
ASTM D6693, Type IV |
20,000 lb |
39 (6) |
68 (12) |
103 (18) |
137 (24) |
205 (36) |
| Tear Resistance, lb (N) | ASTM D1004 | 45,000 lb | 5 (23) | 10 (45) | 14 (63) | 20 (90) | 27 (120) |
| Puncture Resistance, lb (N) | ASTM D4833 | 14 (63) | 25 (112) | 38 (171) | 50 (225) | 72 (320) | |
| Carbon Black Content (%) (Range) | ASTM 1603 | 20,000 lb | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 | 2.0 – 3.0 |
| Carbon Black Dispersion | ASTM D5596 | 45,000 lb | Note(1) | Note(1) | Note(1) | Note(1) | Note(1) |
| Standard Roll Dimensions | |||||||
| Roll Length(2), ft | 1,850 | 1,330 | 1,210 | 910 | 600 | ||
| Roll Length(2), ft | 19 | 19 | 22 | 22 | 22 | ||
| Roll Area, ft(2) | 35,150 | 25,270 | 26,620 | 20,020 | 13,200 | ||
(1)9 of 10 views shall be Category 1 or 2. No more than 1 view from Category 3.
(2)Roll widths and lengths have a tolerance of ± 1%
*Custom material thicknesses also available
This data is provided for informational purposes only. Global Plastic Sheeting makes no warranties as to the suitability of the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice, please check with Global Plastic Sheeting for current updates.
